Article LED lights belt, also called light, soft lights, neon lights, dark trough belt of lamp, white board, copper plate lamp, soft light, banners, building the building lighting lamp, clearance light, landscape lamp, guardrail lamp, lamp modelling, dazzle colour lights, lights, lighting lamp, desk lamp, etc., are often used to draw all kinds of buildings, the outline of construction of large lighting design, all kinds of interior dark slot decoration, community, family beautification lighting decoration, etc.

According to the LED lamp belt and the difference in using occasions for the lamp with different requirements, and high pressure with LED lights and low voltage LED lights two kinds, high pressure lamp with LED lights belt, also known as communication, low voltage LED lamp belt is also called the dc lamp belt, then the two flexible LED lamp with what's the difference? What are the advantages and disadvantages of the two? How do we choose when we buy?

(1) safety: the high-voltage LED lamp belt adopts the voltage work of 220V, which belongs to the dangerous voltage, and the application of the safety hazard in some risk situations; Low-voltage LED lamp is working under the work of dc 12V, belonging to safety voltage, which can be applied to various occasions, without any danger to the person.

(2) installation: high voltage LED flexible light installation is more convenient, can be directly with high voltage driver to drive, factories can be configured, directly buy back directly installed on 220 v power supply can work normally. However, the installation of low-pressure LED flexible lamp strip should be installed in front of the lamp belt.

(3) price: if the single from the point of the price of two lamp tape is the same, but the overall cost to measure on the other hand, because of the high voltage LED lamp belt is high voltage power supply, generally a power can drive 30 to 50 meters LED flexible light bar, so relatively high pressure lamp belt cost is relatively low. And low voltage LED lamp belt to another with dc power supply, generally 1 meter of pearl 5050 lamp with power is about 12 to 14 w, which means that every meters lamp with about 15 w dc power supply, the low-pressure lamp with capital cost will increase a lot, greatly higher than that of the high voltage LED lamp belt. Therefore, the price of high - voltage lamp is cheaper from the whole price.

(4) packaging: the packaging of the high-voltage LED lamp belt is usually 50-100 meters/volume; The low-voltage LED light belt usually does 5-10 m/roll, so the packaging difference between the two is quite large.

(5) service life: the service life of the low-voltage LED lamp belt is 50,000-100,000 hours, and the actual use can reach 30,000 to 50,000 hours. Owing to the high voltage high voltage LED lights belt, the unit length on calorific value than low voltage LED light to take a lot more, directly affect the service life of high voltage LED lights belt, in general the service life of the high voltage LED lamp belt in 10000 hours.

From the above analysis concluded that the high and low voltage LED lights with each have advantages and disadvantages, to buy the user can choose according to their actual use environment for reasonable, do buy proper, used properly, do not waste resources.