LED external luminescent lamp string

I. features of waterproof LED lights:
1. LED lamp string, give full play to LED point light source advantage, any combination, let the LED outer glow word, large outdoor LED advertisement sign, LED electronic lamp box production is easier.
2. Special bayonet design, direct installation after punching, quick installation time.
3. All kinds of plate punching can be used (e.g. electrolytic board, aluminum plastic board, iron plate, stainless steel plate, etc.).
4. Adopt Taiwan famous brand LED chip, with strong brightness, good uniformity of light and color, good color saturation, long life, low attenuation, etc., to ensure the quality of products.
5. Use parallel wiring to break the disadvantage of traditional "one light is not bright and the whole lamp is not bright".
6, all the lights series, the use of intelligent control system, can produce the gradient, jumping, chasing, scanning, anime graphic display effect, and can realize asynchronous and synchronous control, random arrangement, meet different user requirements.

2. LED external light-emitting lamp series specifications:

1. Model: lj-wd series products.

2. Working voltage: DC5V.
3. LED light string colors: red, yellow, blue, green, white, colorful and colorful.

Iii. Application of waterproof LED lights:
Use LED lights to do outdoor lighting and outdoor signs to highlight the brand and fashion, and greatly enhance the scale and scale of merchants. Mainly used for: building roof, hotel outdoor signs, KTV and other entertainment venues signs, shop signs, door signboards, etc.

4. Steps for making LED external light words:
1. LED outdoor signage production needs tools: 40W or 60W soldering iron, soldering tin, electric drill, glue gun, screwdriver, etc.
2. The LED outdoor signboard is made with other materials: the perforated sheet metal, electric wire and phantom LED light source power supply.
3, punching: aperture (9 mm, 12 mm), spacing, according to the height of the outdoor brand system installation and production costs, general LED center spacing for: 10 to 30 mm, the smaller the distance, the higher brightness, the higher the cost.
4. Insert the light: clean the drilled hole and install the light one by one.
5, wired: have already made ready and the attachment of the waterproof LED lamp series, each series has reserved thrum, generally red from the power of the anode, the white thread received the cathode LED dedicated power supply, power supply to be placed in the distribution power box.
6. Test aging: after all the leds are connected, the inspection process is not bright, then the aging test will be tested for 72 hours.
7. Transport to the site and install scaffolding on site.

V. precautions for use:
1. The voltage of the LED lamp string is DC5; Please pay attention to the use of the company's reliable power supply products.
2. The cut-off area from the power outlet should not be less than 4 square millimeters (or 2 2.5).
3. The electric line of the lamp string is connected to the positive pole of the power supply (some are 2, and then received the positive electrode).
4. The electronic thread of the lamp string is connected to the negative electrode of the power supply (some are 2, and then the power source is negative).
5. Please check the lamp or line if the individual light is not on. Please replace the LED lamp if it is not bright.
6. Colorful LED full-color waterproof exposed lamp string is a common positive pole, and the controller controls the negative pole.
7. The four lines of the all-colored LED exposed to the waterproof lamp string are in the positive pole, which is in turn: positive electrode, data, clock, negative electrode.

Blue view photoelectric products adopt electrostatic bag packing. Quality guarantee for 3 years.